Assembly
These are pin connections for the various sensors connected to the Nano.
NOTE: Connect the antenna to the SX 1278 module (do this for both modules).
CONNECTIONS FOR CAPTURE AND TRANSMIT CIRCUIT ( using Arduino Nano ):
RA-02-SX1278 Module
| Arduino Nano Pin | RA-02-SX1278 Pin |
|---|---|
| D10 | NSS |
| D11 | MOSI |
| D12 | MISO |
| D13 | SCK |
| GND | GND |
| 3v3 | 3v3 |
NEO7M GPS
| Arduino Nano Pin | NEO7M GPS Pin |
|---|---|
| D6 | RX |
| D5 | TX |
| GND | GND |
| 5V | VCC |
MPU6050
| Arduino Nano Pin | MPU6050 Pin |
|---|---|
| A4 | SDA |
| A5 | SCL |
| GND | GND |
| 3V3 | 3V3 |
BMP280
| Arduino Nano Pin | BMP280 Pin |
|---|---|
| A4 | SDA |
| A5 | SCL |
| GND | GND |
| 3V3 | 3V3 |
18650 Power Supply
| Arduino Nano Pin | 18650 Power Supply Pin |
|---|---|
| GND | -ve |
| Vin | +ve |